Installing PowerBook G4 Aluminum 17" 1-1.67 GHz DC-In Board

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x
  • x 14

Tripped over your power cord? At least you don't have to replace the entire logic board.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Orient the computer so that the side with the line of screws on it is away from you.

  • Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the three identical Phillips screws from the memory door.

first image

Add Note Edit Step 3  ¶ 

  • Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 47 in stock

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Related Products

G4 Aluminum 17" 1 GHz DC-In Board

$79.95 · 3 in stock

G4 Aluminum 17" 1.33/1.5/1.67 GHz (LR) DC-In Board

$79.95 · 5 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on