Installing PowerBook G4 Aluminum 15" 1.67 GHz Battery Connector

  • Add Note x

This guide will show you how to replace the battery connector on your PowerBook.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the following 10 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Four 3 mm Phillips around the memory compartment.

    • Four 16 mm Phillips along the hinge.

first image

Add Note Edit Step 3  ¶ 

  • Remove the memory compartment cover.

  • Remove the two 12 mm Phillips screws on the Aluminum bracket at the top of the memory compartment.

Next » « Previous

Required Tools

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Related Products

G4 Aluminum 15" 1.5/1.67 GHz Battery Connector

$14.95 · 6 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on