Installing PowerBook G4 Aluminum 15" 1.5-1.67 GHz Lower Case

Unnecessary Steps

Unnecessary Steps

This guide contains steps that are not necessary.

  • Author: iRobot
  • Difficulty: Difficult
  • Add Note x
  • x 3

Replacing the metal bottom case.

Sections
Files
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Edit Step 2 — Upper Case  ¶ 

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Edit Step 3  ¶ 

  • Remove the following 8 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Two 12 mm Phillips on either side of the memory compartment.

    • Four 16 mm Phillips along the hinge.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 47 in stock

Spudger

$2.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

5mm Nut Driver

$9.95 · 12 in stock

Related Products

G4 Aluminum 15" 1.5/1.67 GHz Lower Case

$249.95 · 5 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on