Installing PowerBook G4 Aluminum 15" 1-1.5 GHz Display Data Cable

Add Note Introduction

Difficulty: Very difficult

Replace a broken display data cable to restore LCD functionality.

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Use a coin to turn the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Upper Case

  • Remove the four Phillips screws from the memory door.

  • Slide the memory door away from the memory compartment.

first image

Add Note Step 3

  • Remove the following 8 screws:

    • Two 3 mm Phillips in the battery compartment, on either side of the battery contacts.

    • Two 9 mm Phillips on either side of the memory compartment.

    • Four 16 mm Phillips along the hinge.

Notes

There are no notes