Steps 1–2: Access Door
Step 3: Battery
Steps 4–5: Lower Case
Steps 6–7: Mid Wall
Steps 8–10: Fan
Steps 11–27: Logic Board
Steps 28–29: Microphone
Steps 30–31: Left Speaker
Parts
MacBook Unibody (Model No. A1278) Left Speaker
$19.95 · 16 in stock
Tools
Spudger
$2.95 · 177 in stock
Phillips #00 Screwdriver
$4.95 · 0 in stock
Installing MacBook Unibody Model A1278 Left Speaker
Introduction
| Difficulty: | Moderate |
|---|
Restore balanced sound to your laptop by replacing the left speaker.
Tools used in this guide
Parts relevant to this guide
Paginated Single Page Steps
Step 1
—
Access Door
With the case closed, place the Unibody top-side down on a flat surface.
Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.
Step 2
The access door should now be raised enough to lift it up and out of the Unibody.
Step 3
—
Battery
Be sure the access door release latch is vertical before proceeding.
Grab the white plastic tab and pull the battery up and out of the Unibody.
Notes
There are no notes