Installing MacBook Unibody Access Door

Add Note Introduction

This guide will show you how to remove the Access Door from your laptop.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Access Door

  • With the case closed, place the Unibody top-side down on a flat surface.

  • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

first image

Add Note Step 2

  • The access door should now be raised enough to lift it up and out of the Unibody.

Congratulations!

Share your repair story!

  

To reassemble your device, follow these instructions in reverse order. For more information, check out the MacBook Unibody device page.

Did you successfully follow this guide?

Notes

There are no notes