Installing MacBook Pro 17" Models A1151 A1212 A1229 and A1261 Display

  • Author: iRobot
  • Difficulty: Difficult
  • Add Note x
  • x 17

Change out the entire display assembly, including the inverter, Airport antennas, hinges and casing.

Sections
Tools
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use your fingers to push both battery release tabs away from the battery and lift the battery out of the computer.

first image

Add Note Edit Step 2 — RAM Shield  ¶ 

  • Remove the four identical Phillips screws from the memory door.

first image

Add Note Edit Step 3  ¶ 

  • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Related Products

MacBook Pro 17" (Model A1151) Display Assembly

$649.95 · 4 in stock

MacBook Pro 17" (Model A1261) Display Assembly

$799.95

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on