Installing MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Assembly

  • Add Note x
  • x 12

Use this guide to replace a broken display on your MacBook Pro Unibody.

Sections
Tools
Tools (continued)
Relevant parts
first image
thumb image 1
thumb image 2

Add Note Edit Step 1 — Access Door  ¶ 

  • With the case closed, place the Unibody top-side down on a flat surface.

  • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

first image

Add Note Edit Step 2  ¶ 

  • The access door should now be raised enough to lift it up and out of the Unibody.

first image

Add Note Edit Step 3 — Battery  ¶ 

  • Be sure the access door release latch is vertical before proceeding.

  • Grab the translucent plastic tab and pull the battery up and out of the Unibody.

  • If the latch is depressed it will lock the battery in place.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

T6 Torx Screwdriver

$4.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Related Products

MacBook Pro 15" Unibody (Late 2008/Early 2009) Display...

$699.95 · 1 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 17 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on