Installing MacBook Pro 13" Unibody Mid 2009 Hard Drive

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  • Add Note x

This guide is an internal private guide used as a prereq.

first image

Add Note Edit Step 1 — Hard Drive  ¶ 

  • Remove two Phillips screws securing the hard drive bracket to the upper case.

  • These screws are captive to the hard drive bracket.

first image

Add Note Edit Step 2  ¶ 

  • Lift the the retaining bracket out of the upper case.

first image

Add Note Edit Step 3  ¶ 

  • Lift the hard drive by its pull tab and pull it out of the chassis, minding the cable attaching it to the computer.

Next » « Previous

Popular Device Products

9.5 mm SATA Optical Bay SATA Hard Drive Enclosure

$59.95 · 2 in stock

750 GB 7200 RPM Seagate SATA Hard Drive Upgrade Kit (New)

$219.95 · 22 in stock

MacBook Pro 13" Unibody Battery

$109.95 · 5 in stock

13" Unibody LCD Panel

$129.95 · 49 in stock

Arctic Silver Thermal Paste

$8.95 · 50+ in stock

Notes Add Note Notes are offturn on