Installing Apple TV 1st Generation Hard Drive

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

Replace your hard drive in your Apple TV 1st Generation.

  • Add Note x
  • x 6

Replace your hard drive in your Apple TV 1st Generation.

first image

Add Note Edit Step 1 — Hard Drive  ¶ 

  • Remove the four T8 Torx screws securing the hard drive to the lower case.

first image

Add Note Edit Step 2  ¶ 

  • Peel and remove the hard drive up off the lower case.

  • The hard drive is held on to the lower case with mild adhesive.

  • Disconnect the hard drive data cable from its socket on the hard drive.

  • If you are replacing your hard drive, ensure to transfer the hard drive data cable to your new hard drive.

  • Hard drive remains.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Apple TV 1st Generation device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on