Introduction
This guide details the removal of the DVD-ROM from the disc drive tray.
What you need
-
-
Pull on outer latch.
-
Lower door until it is level with your work surface.
-
-
-
Removing the faceplate.
-
On the inside of the case, find the two plastic tabs.
-
While depressing the tabs, remove the faceplate by pulling and rotating outward.
-
-
-
-
Remove DVD drive from the drive bay.
-
Lift the two metal tabs on the back of the shielding and remove.
-
Remove the four screws on the bottom of the drive with the Phillips #1 screwdriver.
-
Slide out DVD drive.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
11 other people completed this guide.