Removing Texas Instruments TI-92 Back Cover

User-Contributed Guide

User-Contributed Guide

This guide is not managed by iFixit staff.

  • Add Note x

Here we will show how to open the calculator. These are the basic first steps to all other guides.

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 1 — Back Cover  ¶ 

  • The first step to any repair operation is to remove the front cover.

  • Grab the back of the calculator with one hand and the cover with the other.

  • Pull the cover off from one of the sides for easy removal.

first image
thumb image 1
thumb image 2

Add Note Edit Step 2  ¶ 

  • Orientate the calculator with the top facing towards you.

  • Slide the locking tab,found on the top part of the calculator, to the unlock position.

first image
thumb image 1
thumb image 2

Add Note Edit Step 3  ¶ 

  • "Locking Tab"

  • To remove the back cover, slide the cover away from the locking tab towards the bottom of the calculator until the cover no longer slides.

  • Then with the front of the calculator facing down, pull up on the back cover.

  • The calculator should now be orientated with the front facing down, as shown in picture 2.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Texas Instruments TI-92 device page.

Did you successfully follow this guide?

This guide has been completed 0 times.

Comments Add Note Comments are offturn on