Introduction
If you install the sim card in the sim drawer the iPad 2 and it says "no sim card installed", use this guide to repair an iPad 2 that does not recognize the SIM after installation.
What you need
-
-
In this case, check all traces as shown on picture with a volt/ohmmeter.
-
If some are broken make a shunt, as in the second picture to get the sim reader fully working.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
