first image

Add Note Edit Step 7  ¶ 

  • Remove the hard drive by lifting the left edge up and out of the computer.

  • There are four rubber bumpers that fit over the hard drive screws. Ensure that these bumpers come out when you remove the hard drive.

first image

Add Note Edit Step 8  ¶ 

  • Your laptop should look approximately like this.

first image

Add Note Edit Step 9 — Hard Drive Replacement  ¶ 

  • Remove the two black plastic bumpers and two T8 Torx screws from the side of the hard drive.

Next » « Previous

Comments Add Note Comments are offturn on