Nikon Coolpix L18 Logic Board Replacement
An awesome member of our community made this guide. It is not managed by iFixit staff.
This guide needs better markups. Help out by correcting or making some markup annotations.
Missed a Step
Oops! This guide is currently missing some important steps.
- Author: Aaron
- Time required: 15 to 20 minutes
- Difficulty: Difficult
In this guide, we will give you step-by-step instructions on how to remove the logic board so that it can be replaced or repaired.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
CAUTION! This is where energy for the flash is stored. Even with batteries removed, if you touch these connections, you can be shocked, depending on if the flash capacitor has a stored charge. It may not have a stored charge, but work around this assuming it does.
Newer cameras of descent quality usually have a bleeder resistor to drain the flash capacitor. This may not work anymore and the flash capacitor may still have a charge.