Page 19 of 19
Step 55
Close the display and flip the computer over.
The 3.5 mm Phillips screw indicated below with an orange circle may be absent in some models.
Remove the following 8 screws:
Five 3.5 mm Phillips.
One 3.5 mm Phillips near the sleep light connector.
One 3.5 mm Phillips with a large head in the lower left corner.
One 4.5 mm Phillips.
Step 56
Disconnect the inverter and sleep light cables from the logic board.
When replacing the logic board, make sure that the inverter cable is not pinned under the logic board.
Step 57
Lift the logic board far enough to access and disconnect the battery connector.
Be sure to connect the battery connector before seating the logic board in the metal framework.
Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.