Step 37
Disconnect the RJ-11 cable from the top of the modem.
When replacing the modem, first make sure that both the microphone and display data cables are routed beneath where the modem lies.
Step 38 — Display
Turn the computer over.
Disconnect the inverter cable from the logic board and deroute it from the metal framework, removing tape as necessary.
Step 39
Turn the computer back over.
The cable you're about to remove is very fragile - do not pull directly on the wires. Instead, try to pry up the connector directly, using a spudger or a small flathead screwdriver if necessary.
Disconnect the microphone cable at the front of the computer, between the left side of the hard drive and the metal framework.