iBook G4 12" Disassembly: Installing Top Shield - Removing Upper Case (page 11/14)

iBook G4 12" Fixit Guide :: Installing Top Shield (page 11/14)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Upper Case

click image to enlarge	Upper Case (product details: 1.2 GHz: IF183-007 800/1 GHz: IF183-008) Remove the two Phillips screws from the battery compartment.
	We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board. Turn over the computer and open it. Pry up the magnet covering a Phillips screw near the middle of the computer.
	Remove the following 7 screws from the edges of the keyboard area. Three 2 mm Phillips along the right edge. One 4.5 mm Phillips underneath where the magnet was. One 6 mm Phillips with a small head in the lower left corner. Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle