← prev | next →

Page 13 of 14

first image

Step 37 — Hard Drive

  • Remove the three 5 mm standoffs securing the hard drive to the logic board.


first image

Step 38

  • Pull the hard drive cable up from the logic board, using the plastic loop.

  • Lift the hard drive, with metal bracket attached, from the logic board.


first image

Step 39 — Logic Board

  • Remove the following screw and standoffs (the standoffs progress from smallest to largest):

    • One flat-headed Phillips screw near the left side of the RAM slot.

    • The smallest standoff, near where the left hinge used to be.

    • The slightly larger standoff, near where the right hinge used to be.

    • The even larger standoff, near the right side of the RAM slot.

    • The largest standoff, above where the optical drive used to be.


← prev | next →

Page 13 of 14