iBook G3 14" Disassembly: Installing IO Bezel - Removing Top Shield (page 13/14)

iBook G3 14" Fixit Guide :: Installing IO Bezel (page 13/14)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Top Shield

click image to enlarge	Top Shield (product details: IF151-004) Remove the following 16 screws: Five 3 mm Phillips (these have smaller heads than the others). Three 5 mm Phillips. Eight 6 mm Phillips.
	If you have already removed the yellow tape, skip this step. Peel back three strips of yellow tape in the bottom, left corner. Peel back one strip of foil tape near the audio-out port, one near where the trackpad connects to the logic board, and one near where the screen latch used to be.
	Lift the top shield up from the right side, minding the upper left corner, which may catch on the metal framework.