← prev | next →

Page 8 of 12

first image

Step 22

  • This is a diagram of the ribbon clamp connectors you will disconnect in the next step.

  • 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).

  • 2) After disengaging the locking bar, slide the cable out of the connector.


first image

Step 23

  • Loosen the trackpad connector by pulling the top piece up slightly, freeing the trackpad ribbon.

  • Slide the orange trackpad ribbon out of the connector.


first image

Step 24

  • Use a straightened paperclip to open the optical drive tray, and pull it out about halfway.


← prev | next →

Page 8 of 12