Page 1 of 5
Introduction
Each step has a bullet indicating the tool you'll be using. Don't worry about getting lost or confused; hundreds of people have successfully used the Fixit Guide series to repair their laptops.
Tools used in this guide
- Phillips #0 Screwdriver
- Push Pin
- Small Flathead Screwdriver
- Spudger
- T8 Torx Screwdriver
Parts relevant to this guide
Step 1 — Battery
Use a coin or flathead screwdriver to rotate the battery locking screw 90 degrees clockwise.
Lift the battery out of the computer.
Step 2 — Lower Case
Your laptop should look approximately like this.
Step 3
Use a pin (or anything you like) to remove the three rubber feet from the lower case.