Page 1 of 2
Introduction
Each step has a bullet indicating the tool you'll be using. Don't worry about getting lost or confused; hundreds of people have successfully used the Fixit Guide series to repair their laptops.
Tools used in this guide
- Small Flathead Screwdriver
Parts relevant to this guide
Step 1 — Battery
Use a coin or flathead screwdriver to rotate the battery locking screw 90 degrees clockwise.
Lift the battery out of the computer.
Step 2 — Airport
Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.
Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.
Step 3
Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.