PowerBook G4 Ti Onyx Disassembly: Installing Upper Case

PowerBook G4 Ti Onyx Fixit Guide :: Installing Upper Case (page 10/18)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Logic Board

click image to enlarge	Logic Board (product details: 667 MHz: IF125-020 550 MHz: IF125-021) Remove the single T8 Torx screw located near the silver heat pipe.
	Disconnect the three indicated connectors from the logic board. Disconnect the orange PC card cage connector from the logic board. The large multicolor cable may be difficult to free.
	Turn the G4 over. Remove the three T8 Torx screws from the logic board. Be sure not to lose the rubber washers protecting the logic board from the lower two screws.