PowerBook G4 Ti Onyx Disassembly: Installing HD Replacement

PowerBook G4 Ti Onyx Fixit Guide :: Installing HD Replacement (page 3/5)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Hard Drive

click image to enlarge	Hard Drive (product details: 40 GB: IF107-015 60 HD: IF107-016) Disconnect the hard drive ribbon from the logic board using a spudger or the tip of your finger, removing tape as necessary.
	To free the hard drive, remove the two T8 Torx screws from the right wall of the battery housing.
	Remove the hard drive by gently grasping the orange ribbon cable and lifting the left edge up and out of the computer. There are four rubber bumpers that fit over the hard drive screws. Ensure that these bumpers come out when you remove the hard drive.