← prev | next →

Page 8 of 9

first image

Step 22

  • Turn the G4 over.

  • Remove the two T8 Torx screws from the middle of the logic board.


first image

Step 23

  • Disconnect the four indicated connectors from the logic board, removing tape as necessary.


first image

Step 24

  • Carefully lift the logic board up and pull it away from you. The logic board may catch on the back panel ports liner. If this occurs, use a spudger or non-metal tool to free the logic board.

  • This step requires some force, but if the logic board will not come up, make sure you have removed all screws and connectors necessary.

  • Remove the logic board from the computer.


← prev | next →

Page 8 of 9