PowerBook G4 Ti Mercury Disassembly: Installing Inverter Board

PowerBook G4 Ti Mercury Fixit Guide :: Installing Inverter Board (page 17/17)	prev \| contents
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Inverter Board

click image to enlarge	Inverter Board (product details: IF121-052) Remove the single black T8 Torx screw from the right side of the upper case. Do not overtighten this screw or you may crack the plastic. Disconnect the orange ribbon cable that connects underneath the inverter board.
	Lift up on the grey plastic framework enough to allow the inverter board to pass through. Be careful not to lift too far, or you may break the framework. Remove the inverter board by sliding it up and to the right.
	You have successfully removed the Inverter Board. To reassemble your laptop, simply follow the directions in reverse order.