Page 13 of 13
Step 37
Your laptop should look approximately like this.
Step 38 — Inverter Board
Remove the single black T8 Torx screw from the right side of the upper case.
Do not overtighten this screw or you may crack the plastic.
Disconnect the orange ribbon cable that connects underneath the inverter board.
Step 39
Lift up on the grey plastic framework enough to allow the inverter board to pass through. Be careful not to lift too far, or you may break the framework.
Remove the inverter board by sliding it up and to the right.
Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.