PowerBook G4 Al 15" 1-1.5 GHz BT 1.1 Disassembly: Installing RJ-11 Board

PowerBook G4 Al 15" 1-1.5 GHz BT 1.1 Fixit Guide :: Installing RJ-11 Board (page 9/22)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Display

click image to enlarge	Display (product details: IF154-012) If you have already removed the hard drive or optical drive, your computer may differ slightly from the images in this section. These parts do not affect this procedure. Close the display and turn the hinge side of the computer to face you. Remove the remaining Phillips screw on either side of the hinge (two screws total).
	Open the computer with the display facing you. Use a spudger to pry the bluetooth board from the gap between the battery housing and front of the lower case.
	Disconnect the bluetooth antenna cable from the bluetooth board. Deroute the bluetooth antenna cable along the left edge of the computer, removing tape as necessary.