Step 49
Do not pull the DC/Sound card out entirely. You will be disconnecting the Bluetooth cable in the next step.
Lift the DC/Sound card out of the computer and turn it over.
Step 50
Disconnect the Bluetooth cable from the DC/Sound card, removing tape as necessary.
Step 51
Use your thumbs to slide the RJ-11 board away from the sound card in the same direction you would disconnect a cable. This is your chance to get out some aggression, as the board will most likely be very tight and requires a good deal of force to remove. Don't get carried away though - don't hold onto the power connector and don't put too much actual force on the card itself.