PowerBook G4 Al 15" 1-1.5 GHz BT 1.1 Disassembly: Installing DC & Sound Card

PowerBook G4 Al 15" 1-1.5 GHz BT 1.1 Fixit Guide :: Installing DC & Sound Card (page 11/19)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Logic Board

click image to enlarge	Logic Board (product details: 1 GHz: IF154-004 1.25 GHz: IF154-037) If you have already removed the display or hard drive, you may have already removed some of the cables described in this step. You may also ignore their presence in the following images; they do not further affect the disassembly procedure. Disconnect the indicated 13 cables from the logic board, starting in one place and moving around the board.
	There should be no cables connected to the top of the logic board at this point. Remove the following 12 Phillips screws from the logic board: Six 4 mm around the edges of the logic board. Two 5 mm securing the right speaker to the logic board (move the speaker off of the logic board). Three 6 mm with wavy washers in the upper, left corner of the logic board. One 4 mm underneath a black bumper in the back right corner of the logic board. One 4 mm screw may not be present on some logic boards.
	Two cables still connect to the logic board and must be removed before pulling the board entirely out of the computer. Use a spudger to gently (very gently) pry up the left side of the logic board.