PowerBook G4 Al 12" DVI Disassembly: Installing DC-to-DC Board

PowerBook G4 Al 12" DVI Fixit Guide :: Installing DC-to-DC Board (page 10/10)	prev \| contents
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing DC-to-DC Board

click image to enlarge	DC-to-DC Board (product details: 1/1.33 GHz: IF153-002 1.5 GHz: IF153-074) Remove the following five screws: One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch). Two 3.5 mm Phillips attaching the EMI fingers to the metal framework. One 10 mm Phillips near the optical drive. One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers. Lift the EMI fingers above the battery connector away from the metal framework.
	Lift the end of the DC-to-DC board closest to the display and pull the board out of the computer.
	You have successfully removed the DC-to-DC Board. To reassemble your laptop, simply follow the directions in reverse order.