PowerBook G4 Al 12" DVI Disassembly: Installing DC-In Board

PowerBook G4 Al 12" DVI Fixit Guide :: Installing DC-In Board (page 9/20)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Heat Sink

click image to enlarge	Heat Sink (product details: IF153-007) Peel back the yellow tape securing the inverter cable near the fan.
	Remove the following eight screws: One 4.5 mm Phillips near the modem. Three 6 mm Phillips near the display. Two large 7.5 mm Phillips with attached springs. Two 13 mm Phillips, one on the lower left side of the heat sink and one between the fan and the optical drive.
	Peel up the Bluetooth cable on the right side of the fan.