|
click image to enlarge
 |
- Remove the following five screws:
- One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
- Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
- One 10 mm Phillips near the optical drive.
- One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
- Lift the EMI fingers above the battery connector away from the metal framework.
|
 |
- Lift the end of the DC-to-DC board closest to the display and pull the board out of the computer.
|
;void('');)
;void('');)
