PowerBook G4 Al 12" 867 MHz Disassembly: Installing DC-In Board

PowerBook G4 Al 12" 867 MHz Fixit Guide :: Installing DC-In Board (page 16/20)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Metal Framework

click image to enlarge	Metal Framework (product details: IF153-061) Disconnect the multicolor connector from the upper right corner of the logic board. Remove the following 2 screws: One Phillips buried under the cable to the right of the fan area. One Phillips holding down the display data cable on the left side of the computer.
	Disconnect the two connectors on the left side of the computer near the ports.
	Use the black plastic pull tab to disconnect the display data cable from the logic board. Deroute the display data cable, pulling up the yellow tape at the RJ-11 board.