PowerBook G4 Al 12" 867 MHz Disassembly: Installing DC-In Board

PowerBook G4 Al 12" 867 MHz Fixit Guide :: Installing DC-In Board (page 12/20)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Heat Sink & Fan

click image to enlarge	Heat Sink & Fan (product details: Heat Sink: IF153-025 Fan: IF153-036) Remove the single Phillips screw fastening the inverter cable.
	Disconnect the Bluetooth cable and deroute it.
	Peeling up yellow tape as necessary, remove the following 8 screws: One 4.5 mm Phillips on the right side of the heat sink. Three 6 mm Phillips near the display. Two large 7.5 mm Phillips with springs (don't forget to remove the springs) Two 13 mm screws from the left side of the heat sink and the right side of the fan.