Step 19
Disconnect the orange display inverter cable on the right side of the computer. Grasp the cable near the connector and pull directly up.
Make sure that both cables are free from the plastic casing before proceeding to the next step.
Step 20
Turn the laptop around so that its back faces you.
Open the port door located at the back of the laptop.
Remove the four black T8 Torx screws.
Step 21
Turn the laptop back around so that the screen faces you.
Adjust the display so that it is in a vertical position.
Hold the display on both sides and pull directly up until its hinges are free of their mounts