PowerBook G3 Wallstreet Disassembly: Installing Fan - Removing Upper Case (page 10/14)

PowerBook G3 Wallstreet Fixit Guide :: Installing Fan (page 10/14)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Upper Case

click image to enlarge	Upper Case (product details: IF103-006) Remove the four T8 Torx screws from the upper case.
	Turn the laptop over. Remove the eight T8 Torx screws from the bottom casing. There are two longer screws in the front left and front right corners; make sure to put them back in the proper place when reassembling.
	Turn the laptop over. Disengage the small locking tab by pressing in on the upper case to the right of the PMU connector. Lift the upper case up just enough so that the tab rests on its metal bracket.