PowerBook G3 Lombard Disassembly: Installing Upper Case

PowerBook G3 Lombard Fixit Guide :: Installing Upper Case (page 13/15)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Upper Case

click image to enlarge	Upper Case (product details: IF131-006) Remove the three long silver and two short black Torx screws from the beige plastic casing.
	Turn the Lombard so that the trackpad is nearest you and slide the thin plastic shield away from you, out from under the black casing. Disconnect the newly revealed thin orange ribbon from the logic board, to the left of the trackpad. Remove the two long silver Torx screws.
	Turn the laptop over. Remove the seven Torx screws from the bottom casing. There are two long screws in the front left and front right corners; make sure to put these back in the proper place when reassembling.