← prev | next →

Page 9 of 10

first image

Step 25

  • Remove the two silver T6 Torx screws from the top left and bottom right corners of the left speaker assembly.

  • The magnet in the MagSafe connector may pull the upper screw towards it after the screw has been freed.


first image

Step 26

  • Lift up on the left speaker assembly and rotate it slightly. It is not possible to entirely remove the speaker yet, as it is still connected to the left I/O board beneath.


first image

Step 27

  • Disconnect the two cables securing the left speaker to the I/O board.


← prev | next →

Page 9 of 10