← prev

Page 6 of 6

first image

Step 16 — Hard Drive Replacement

  • Remove the two silver T6 Torx screws and white rubber bumpers from the right side of the hard drive.

  • You'll need to transfer these screws and bumpers to your new hard drive if you're changing drives. Make sure to put these on the right side of the drive when looking at the label.


first image

Step 17

  • Remove the two silver T6 Torx screws from the left side of the hard drive (the rubber bumpers remain in the case for the left side of the drive)

  • You'll need to transfer these screws to your new hard drive if you're changing drives.


Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.

← prev

Page 6 of 6