← prev

Page 8 of 8

first image

Step 22

  • Slide the keyboard ribbon out of its connector.

  • If the keyboard ribbon won't slide out, make sure that the black plastic flap holding the ribbon in place is vertical.


first image

Step 23

  • Place the upper casing on its edge and use a spudger to push the keyboard away from the casing, poking the spudger through the central keyboard screw hole. Grasp the keyboard as it separates from the casing.


first image

Step 24

  • Maintaining your hold on the keyboard, lay the casing flat and gently bow the keyboard until the two tabs on either side of the keyboard come free.

  • Slide the keyboard away from the trackpad and out of the upper case.


Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.

← prev

Page 8 of 8