← prev | next →

Page 13 of 16

first image

Step 37

  • Support the display with one hand while removing the following 3 screws:

    • Two 9.5 mm silver T6 Torx screws with threads on only part of the shaft on the inside of the display hinges.

    • One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.


first image

Step 38

  • Grasp the display assembly on both sides and lift it up and out of the computer.


first image

Step 39

  • Disconnect the IR and sleep light cables from their connectors above the hard drive.


← prev | next →

Page 13 of 16