Page 5 of 5
Step 13
Peel up the left ambient light sensor cable from above the left fan, removing tape as necessary.
Step 14
Remove the following 3 screws:
One 6.2 mm black T6 Torx screw from the right side of the fan.
Two 9.4 mm silver T6 Torx screws from the left side of the fan.
Step 15
Lift the lift fan up and carefully peel up the tape securing the fan to the heat sink as you go.
Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.