Page 6 of 6
Step 16
Remove the silver T6 Torx securing the ground loop in the display data cable to the casing.
Step 17
Support the display with one hand while removing the following 3 screws:
Two 9.5 mm silver T6 Torx screws with threads on only part of the shaft on the inside of the display hinges.
One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.
Step 18
Grasp the display assembly on both sides and lift it up and out of the computer.
Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.