← prev | next →

Page 5 of 6

first image

Step 13 — Left I/O Frame

  • Disconnect the MagSafe board cable from the logic board.


first image

Step 14

  • Remove the single Phillips screw securing the left speaker to the lower case.

  • Lift the left speaker out of its housing and set it to the side.


first image

Step 15

  • Remove the following 3 screws:

    • Two 7.5 mm Phillips from either end of the left I/O frame.

    • One 9 mm Phillips from the middle of the left I/O frame.

  • Remove the small black plastic spacer at the bottom of the left I/O frame.


← prev | next →

Page 5 of 6