Page 10 of 10
Step 28
Peel up the silver foil tape from the optical drive.
You'll want to reapply this tape in the same position on your replacement drive.
Step 29
Remove the two Phillips screws securing the mounting bracket to the right side of the optical drive.
This bracket is designed to slide back and forth slightly, so don't tighten the screws so much that the bracket is unable to slide.
Step 30
Use a spudger to pry the gray Bluetooth antenna holder off the top of the optical drive.
You'll want to reapply this piece in the same position on your replacement drive.
Congratulations! You have now removed your item. To reassemble simply follow the directions in reverse order.