Fix Your Stuff Community Store

MacBook Core 2 Duo Hard Drive Replacement

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Introduction

How to remove the hard drive, along with its cable and bracket from your computer.

What you need

  1. MacBook Core 2 Duo Hard Drive Replacement, Battery: step 1, image 1 of 1

    • Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.

    Edit

  2. MacBook Core 2 Duo Hard Drive Replacement: step 2, image 1 of 1

    • Lift the battery out of the computer.

    Edit

  4. MacBook Core 2 Duo Hard Drive Replacement, Memory Cover: step 3, image 1 of 1

    • Unscrew the three evenly-spaced Phillips 000 screws from along the rear wall of the battery compartment.

    • The screws are captive to the metal memory cover so you cannot lose them.

    • Using The Flexible Extension sold by iFixit will help with this step.

    Edit

  5. MacBook Core 2 Duo Hard Drive Replacement: step 4, image 1 of 1

    • Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.

    • Lift the memory cover up and out of the computer.

    Edit

  6. MacBook Core 2 Duo Hard Drive Replacement, Hard Drive: step 5, image 1 of 1

    • Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.

    • The hard drive goes back into its compartment with the label facing down.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 1 other contributor

iRobot

Member since: 09/24/09

1 Reputation

635 Guides authored

Badges: 36

+33 more badges

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 7,530