Mac Mini (PowerPC) Disassembly: Installing Optical Drive

Mac Mini (PowerPC) Fixit Guide :: Installing Optical Drive (page 5/6)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Optical Drive

click image to enlarge	Optical Drive (product details: Super: IF106-051 Combo: IF106-058) Remove the four silver Phillips screws attaching the optical drive to the black plastic framework (two on each side).
	If your mini does not have a Bluetooth board, you may skip the following step. Remove the yellow tape securing the Bluetooth antenna cable to the black plastic framework. Lift the silver Bluetooth antenna board out of its slot.
	The cables you're about to remove are very fragile - do not pull directly on the wires. Instead, try to pry up the connector directly, using your fingernails or a small flathead screwdriver if necessary. Flip the mass storage assembly over and disconnect the speaker and fan cables from the interface board.