Mac Mini (PowerPC) Disassembly: Installing Bluetooth Board - Removing Mass Storage Unit (page 3/6)

Mac Mini (PowerPC) Fixit Guide :: Installing Bluetooth Board (page 3/6)	prev \| contents \| next
iFixit sells MacBook, iBook & PowerBook parts and accessories	Now Removing Mass Storage Unit

click image to enlarge	Mass Storage Unit If your mini does not have Airport installed, then skip this step. Grasp the Airport antenna board and lift it off of the two plastic posts holding it in place. You may need to push back the black plastic tab jutting through the lower left corner of the board.
	Remove the yellow tape securing the power button cable to the black plastic framework.
	Remove the three black Phillips screws securing the plastic framework to the logic board and lower case.